Best flux cored wire Radiator Welding

Best flux cored wire is used to weld copper,aluminum,stainless steel and iron.It is also called radiator welding or radiator solder.
 
Diameter of flux cored wire:2mm
Length of flux cored wire:1meter
Package:1meter per pcs,1 pcs per transparent bag

 
The feature of flux cored wire:

1. This flux cored wire is developed with imported materials from France. So it has a Low melting point and good mobility.These characteristics are helpful for  personnel maintenance.
2.Because flux cored wire include flux.There is no need to add flux in the flux cored wire.
3. Before welding, the welding item should be removed oil and rust. Then use flux cored wire in medium heat Welding.
4. The flux in the flux cored wire is non-corrosive flux.
So it is no need to wash residual flux.

 
Pay Attention Details of flux cored wire:

After welding, the joint of flux cored wire must be heat-shrinkable or dehydrated for waterproof treatment to extend Long service life.So that it could help to prevent the flux from burning out early and poor fluidity during welding.Then to be defective products such as blowholes, etc.
 
Note the following of flux cored wire:
1. The welding time of flux cored wire cannot be too long
2. Welding degree should not be too high
3. Welding should be done at one time, and do not repair the weld many times.